CyberLock Slam Lock IC Housing

For high use drawer applications especially in counters within shopfitting, the CL Slam Lock is the most ideal style of lock to use. It enables users to close the drawer quickly without the use of a key. This is both very convenient and a security measure. The Slam Lock can also be installed on cupboard doors where a quick closing action is required.

• CL drawer lock range has a square base and is made of diecast zinc
• This lock range has an interchangeable barrel system
• This square lock range can be used to suit a door lock or a cupboard lock just by rotating the barrel on the lock housing.
• Square lock housings dimensions are 42mm x 42mm square
• Square lock housings have an offset cylinder
• Lock has a spring loaded latch for push closing
• Lock has a bolt projection of 10mm
• The system offers two groups of 650 keyed to differ CC and CD standard barrels
• Also available in a high security dimple key series with up to 800 key differs
• Both CC and CD groups are operated by a grand master key and removal key
• Master and removal key available
• Barrels must be ordered separately
• Nickel Silver or Black finish
• Assembly instructions for the barrel: Insert barrel by lining up the profile on the end of the barrel and lining up with the diamond shape in the housing, when the cylinder is flush with the housing hold the tongue down and turn the key all the way to the right, then all the way to the left and back 180 degrees, let go of the tongue and the barrel should be installed correctly with the angle of the tongue starting at the edge of the lock housing.
• To remove the barrel, hold the tongue down, again turn the key all the way to the left and pull out the black key and insert the red removal key and the cylinder will pull out.