Lockwood 12-24Vdc 60Mm Electric Mortice Lock Fail Safe Mon Two Cylinders

$1,240.12


Description

Designed and manufactured in Australia, the 3570 series electric mortice is a high performance lock of superior quality. It is constructed from high grade zinc alloy, with a stainless steel latch bolt and face plate and is suited for all commercial applications. The lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers.

Key Features Designed with flexibility in mind, the one lock can cover all functions and is easily configured on site for the required application. Available in non-monitored and monitored versions.

Monitoring features:

Dead latched and Locked
Door position/Reed switch
Dual key override monitoring
Request to exit/REX
LED indication
Microswitches: 500mA (max) @ 30Vdc each circuit.
Reedswitch: 100mA (max) @ 30Vdc
Field Changeable settings:

Fail safe/fail secure configuration.
Multi-voltage - will work on 12-24 Vdc systems.
Handing - left hand and right hand doors
Selection of free lever or locked lever on both sides of the door
Key override monitoring either side of the door
Monitoring contacts - normally closed, normally open (for key override and request to exit only)
Standards and Compliance

S3 (Security) Australian Lock Standard (AS4145.2.1993) (when used with equivalent security level keying system)
D3 (Durability) Australian Lock Standard (AS4145.2.1993)
Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
C-Tick Certified
3570 Series: SCEC endorsed for intruder resistant areas
3579 Series: SCEC endorsed for secure areas
Voltage

12Vdc - 24Vdc Operating Voltage
Current 500mA (max) 80mA holding @ 12Vdc 275mA (max) 50mA holding @ 24Vdc
LED Current When LED's are fitted, add 15mA (max) to total current draw
Environment

Operational temperature range -20c to + 60c
Case / Cover

High purity Zinc alloy construction
Backset

60mm standard, 89 & 127 mm available
Latch bolts

Reversible with Stainless Steel construction.
Door Clearance

3 - 6.5 mm
Door thickness

Standard applications 32 to 50mm.
Cylinder

Standard Lockwood oval shaped cylinders.
Cabling

1.6 metre length of cable with 12 pin socket supplied with each lock. Recommended cable: 18AWG (0.82mm²) cable runs up to 30m.
Furniture

Compatible with Lockwood series door furniture.
Standard Finishes

Satin Chrome (SC) standard. Bright Chrome (CP) and Polished Brass (PB) finishes available
Note: For detailed electrical specifications, refer to catalogue.
Specification Statement

The lock should be capable of operation on voltages between 12 - 24Vdc and have a current consumption not more than 80mA (holding) @12Vdc and 50mA (holding) @24Vdc.

Monitored locks must be capable of monitoring the following functions: Key override, door position / reed switch, selectable hub / Request to exit, & locking bar status.

All monitoring outputs must have the ability to be wired independently. All settings - including: fail safe / fail secure, handing, hub selection must be field configurable.